13
APPENDIX C – PARADOX SERIAL INTERFACE
The TXC+ can send alarms received from the serial port of the Paradox E65, MG5050 and SP6000
alarm panels.
Events Sent By the Paradox Alarm Panel
The table below shows the Contact ID codes which will be sent in response to the messages
received from the Paradox E65/MG5050 and SP6000 alarm panel serial ports.
PARADOX CONTACT ID
EVENT GROUP NO SUB-GROUP NO CONTACT ID
CODE
EVENT (1)
RESTORE (3)
ZONE/
USER
06 = Non Reportable Event 00 = Telephone Line Trouble 350 1 0
29 = Arming with User 01 - 32 = User Number 400 3 USER
30 = Special Arming
03 = Partial Arming 456 3 0
05 = Arm Keyswitch 409 3 99
06 = Arm Keyswitch 456 3 0
31 = Disarming with User 01-32 = User Number 401 1 USER
32 = Disarming after Alarm with user 01-32 = User Number 401 1 USER
34 = Special Disarming
N/A 401 1 USER
05 = Disarming with Keyswitch 401 1 USER
36 = Zone In Alarm 01 to 32 = Zone Number 130 1 ZONE
37 = Fire Alarm 01 to 32 = Zone Number 110 1 ZONE
38 = Zone Alarm Restore 01 to 32 = Zone Number 130 3 ZONE
40 = Special Alarm
00 = Panic non-medical emergency 120 1 0
01 = Panic medical 100 1 0
02 = Panic Fire 110 1 0
05 = Duress Alarm 120 1 0
42 = Zone Tampered 01-32 = Zone Number 380 1 ZONE
To Next Page
Loading...