REMOTE CONTROL UNIT & PANEL DESCRIPTION
English v 1.1
´´o
PANEL & REMOTE CONTROL UNIT DESCRIPTION
FRONT PANEL DESCRIPTION
1. POWER. Switches the receiver on or in standby mode.
2. POWER LED: Show if the receiver has power.
3. LOCK LED: It is on when in the input Antenna IN has enough signal level.
4. DISPLAY: Four digits to display the program number.
5. IR -SENSOR: Reception sensor for the IR remote control signals.
DESCRIPCIÓN DEL PANEL TRASERO
1. USB: Port USB 2.0.
2. COAXIAL S/PDIF: Coaxial output for digital audio (AC3).
3. LOOP OUT: Output for cascading other devices.
4. ANTENNA IN: Input of digital tuner.
5. HDMI: HDMI Output to connect to TV.
6. TO TV: SCART Output to connect to TV
7. DC IN: 12VDC connection (power supply)
1
2
3 4
5
2
1
3 4 5 6 7
To Next Page
