LS Wiring Harness
13
8.4 Bosch LSU 4.2 Wideband O2 Sensor
Bosch LSU 4.2 is a pretty popular wideband O2 sensor used with
the WB-O2 Nano.
Part numbers: FuelTech 3022000965 or Bosch 17014
8.5 NTK Wideband O2 Sensor (for alcohol engines)
The NTK laboratory wideband O2 sensor is recommended for engines
running alcohol.
This sensor must be used with the FuelTech Alcohol O2 module.
Adapters for both sensors and WB-O2 unit will be required (sold
separately)
NTK sensor requires free-air calibration. Check Alcohol O2 manual for
further instructions.
To purchase NTK sensor, contact FuelTech Part number #5005100011
9. O2 Reading
9.1 FuelTech WB-O2 Nano
There are dual FuelTech WB-O2 Nano. Each WB-O2 Nano has one
connector with 12-way Molex MX120G connector. FuelTech WB-O2
Nano does not require free-air calibration. For further information,
check FuelTech WB-O2 Nano manual.
9.2 Alcohol O2 (for alcohol engines)
FuelTech offers a special conditioner for engines running alcohol, the
FuelTech Alcohol O2. A simple adapter harness makes this unit plug
and play on the WB-O2 Nano connections.
A special NTK laboratory sensor is required by the Alcohol O2. Contact
FuelTech in order to purchase the sensors and adapters to plug on
the FuelTech LS harness.
To Next Page
Loading...
