4
2. Presentation
The FuelTech LS Wiring Harness is the proper link between the
FuelTech FT500 ECU and all of your sensors and actuators.
The harness has all the components needed to make a plug and play
installation on an engine. It has all the relays and fuses needed for the
system on a standard setup, a firewall grommet to hold and seal the
harness and every connector has its own label.
The insulation and connectors are humidity, heat and oil resistant.
Specifications:
- 8 injector outputs (EV1 (Jetronic/Minitimer) or EV6/EV14
(USCAR) or Nippon Denso)
- Coil outputs: harness is setup for OEM coil harness (re-use your
factory harness using stock plug)
- Coils are setup in WASTED SPARK mode
- 2 FuelTech Peak and Hold external drivers ready
- Plugs for both 58x and 24x crank triggers (only one is used)
- 24x sensor connector: Delphi Metri-pack 150 829-12059595
- 58x sensor connector: Delphi Metri-pack 150 829-12129946
- Plugs for both front and rear cam sync sensors (only one
is used) - *** TIMING GEAR MUST BE SINGLE TOOTH ON
24X APPLICATIONS AND FOR SEQUENTIAL TIMING ON 58X
APPLICATIONS. USE LS2 STYLE GEAR: PN 12576407.
- Front cam sensor: AC Delco 12591720
- Rear cam sensor: AC Delco 12561211
- 24x sensor connector: Delphi Metri-pack 150 829-
12059595
- Connectors for stock electronic throttle body (88mm to 90mm)
and pedal (drive by wire) and cable throttle (GM TPS – round
3-wire plug)
- PEDAL: 2005 to 2013 Corvette style - GM 25835421
- THROTTLE
- LS2 90mm - GM 12570790
- LS7 90mm - GM 12605109
- LSA/LS9 88mm - GM 12629992
- Dual FuelTech WB-Nano O2 ready (adapter to Alcohol O2 is sold
separately for alcohol engines)
- Dual Bosch wideband O2 sensor ready (adapter to NTK lab
sensor is sold separately for alcohol engines)
- GM Style intake air temperature sensor ready
- GM Style engine temperature sensor ready
- 2 pressure sensor ready for fuel and oil 0-5V sensor (FuelTech
PS150 connector)
- 3x high output relays with fuses
- Extra connector with 7 inputs and 8 outputs for generic use
- Grommet for firewall
Dimensions (in package): 14” x 11” x 14”
Weight for LS HARNESS: 8 lbs 3oz
To Next Page
Loading...
