Fuji Electric FJ Series - Page 11

z Thermal overload relays
z Auxiliary relays
TK 12B — 009
(1) (2) (3)
(2) Setting current (A) Applicable contactors Code
0.1 - 13 FJ-B06, B09, B12 12B
0.1 - 18 FJ-B18 18B
0.1 - 32 FJ-B25, B32 32B
4 - 65 FJ-B40, B50, B65 65B
7 - 96 FJ-B80, B95 95B
(3) Setting range (A) Code (3) Setting range (A) Code
0.1-0.15 P10 12-18 012
0.13-0.2 P13 13-18 013
0.18-0.27 P18 16-22 016
0.24-0.36 P24 18-26 018
0.34-0.52 P34 20-26 020
0.48-0.72 P48 24-36 024
0.64-0.96 P64 26-32 026
0.8-1.2 P80 28-40 028
0.95-1.45 P95 32-42 032
1.4-2.1 1P4 34-50 034
1.7-2.6 1P7 40-50 040
2.2-3.4 2P2 44-54 044
2.8-4.2 2P8 45-65 045
4-6 004 48-68 048
5-7.5 005 53-65 053
6-9 006 64-80 064
7-10.5 007 68-86 068
9-13 009 86-96 086
(Note) Depending on different types,
production may not be able to proceed.
Please refer to P.21.
SKH4 A B H — H5 22
(1) (2) (1) (3) (4) (5)
(1) Basic type Code
Contactor relay SKH4B
(2) Control coil Code
AC A
DC G
(3) Contact Structure Code
Double-contact None
Single-contact H
(5) Contact arrangement Code
4NO 40
3NO1NC 31
2NO2NC 22
(4) Rated voltage of AC coil Code
AC24V 50Hz/24-26V 60Hz E
AC100-110V 50Hz/110-120V 60Hz H
AC220-240V 50Hz/240-260V 60Hz P
AC380-400V 50Hz/400-440V 60Hz 4
(4) Rated voltage of DC coil Code
DC24V E
DC48V F
DC110V H
DC220V M
(1) Basic type Code
Thermal overload relays TK
Information subject to change without notice
11
FJ Series