Safety
Magnetic contactor equipped with mirror contact
Mirror contact conforms to the requirement for auxiliary contact that is
intended to be included in the future amendment to IEC 60947-4-1.
Mirror contact : Normally closed auxiliary contact,which cannot be in
closed position simultaneously with the normally open main contact.
Terminal cover for finger protection
The terminal cover satisfies the requirements of Machinery Directive
EN60204-1 “Direct Contact Prevention” concerning mechanical safety.
Standards
Standard models of the FJ Series are certified by CCC and have
obtained a CE mark, and that is shown on the nameplate of the main
unit.
Ecology
Compliant with RoHS directive (Restriction of Hazardous Substances in the EU)
The materials used do not contain any of the six substances that are specified in the RoHS
Directive or have less than the specified content percentages of those substances.
China Energy Label
The FJ Series of magnetic contactors is highly energy efficient and they have met the
specified value defined by the Energy Efficiency Label Management Method. Especially,
FJ-B06, B09, B12, B40, B50, B65, B80 and B95 types are energy saving with an energy
efficiency class of 2.
Energy Efficiency Label
Frame
06 09 12 18 25 32 40 50 65 80 95
Sealed VA
4.5 4.5 4.5 9 9 9 12.7 12.7 12.7 13.4 13.4
Class
2 2 2 3 3 3 2 2 2 2 2
Safety
Ecology
Moving
contact
Stationary
contact
Moving
contact
Stationary
contact
Main contact
Moving
contact
Moving
contact
Coil off
Stationary
contact
Stationary
contact
Main contact
welding
NC contact gap:
0.5 mm or more
Mirror contact IEC60947-4-1
NC auxiliary
contact
4
To Next Page
Loading...