Machine Information
117
Machine Status
4
îš„ Off-line
The machine does not accept data from a computer. Any data being sent is cancelled and
not printed.
îš„ On-line
The printer accepts data from a computer.
3 Select a printer language to set a print mode.
4 Set each item.
Note • The items displayed vary depending on the
printer language.
Retrieve Programming
You can retrieve and use settings registered in memory.
1 Select [Retrieve Programming].
2 Select the memory number to use.
îš„ Factory Defaults
You can use the factory default settings.
îš„ Custom Settings
Displays the numbers stored in the memory.
Programming
You can check or change the value set for the print mode item number.
For the item numbers that can be configured in each mode menu, refer to "ESC/P-K Emulation Settings" (P.632), "PDF Direct
Print Settings" (P.645), "PCL Emulation Settings" (P.651), and "HP-GL/2 Emulation Settings" (P.658).
1 Select [Programming].
2 Enter the item number of the feature to set in
[Item Number] with the numeric keypad.
3 Select [Confirm].
4 Select [Change Value].
To Next Page
Loading...
