15 Problem Solving
506
Problem Solving
15
016-722
[Cause] The specified staple position is not supported by the machine, or the paper size specified
is not supported by the finisher.
[Remedy] Confirm the staple position and the paper size, and try printing again.
016-723
[Cause] The specified punch position is not supported by the machine, or the paper size
specified is not supported by the finisher.
[Remedy] Confirm the punch position and the paper size, and try printing again.
016-724
[Cause] The specified staple and punch position combination is unsupported.
[Remedy] Specify the staple and punch positions on the same side, and try printing again.
016-725
[Cause] A scanned document stored in a folder was to be sent by fax using the Job Flow feature,
but the file in the folder could not be converted to fax data.
[Remedy] Do not use the Job Flow feature. Simply scan the document from the machine's [Fax]
screen to send it by fax.
016-726
[Cause] Unable to automatically select a printer language because PostScript data was sent
with no Adobe PostScript 3 Kit (optional) installed.
[Remedy] The Adobe PostScript 3 Kit (optional) must be installed.
016-727
[Cause] A print job was cancelled without storing a file into a folder because the file was
determined as not containing any pages.
[Remedy] The file could not be stored into the folder because the machine determined the print
file as not containing any pages. Disable [Skip Blank Pages] on the [Advanced] tab on
the print driver, or add text to the file if the file is blank.
016-728
[Cause] An unsupported tag is included in the TIFF file.
[Remedy] Confirm the print data.
016-729
[Cause] Unable to print because the number of colors or the resolution of the TIFF file exceeds
the allowed range.
[Remedy] Change the number of colors or resolution for the TIFF file, and execute the operation
again.
016-731
[Cause] Unable to print TIFF data because it was interrupted.
[Remedy] Retry printing.
016-732
[Cause] The form specified by emulation has not been registered at the host side.
[Remedy] Resend the form data.
016-733
[Cause] Probable causes are as follows:
1)Unable to obtain the IP address (the string after "@" in the destination e-mail address)
when e-mail is sent.
2)DNS server was unable to resolve the Internet address (the string after "@") by the
DNS server when e-mail is sent.
[Remedy] For 1), confirm the e-mail address.
For 2), confirm the DNS server address.
016-735
[Cause] Attempted to print [Job Template List] while updating the job template.
[Remedy] Retry printing after waiting for a while.
016-738
[Cause] Unsupported paper size was specified when specifying booklet creation with PostScript
(optional).
[Remedy] Specify a paper size supported for booklet creation, and try printing again.
Error Code Cause and Remedy
To Next Page
Loading...
Need help?
General
