Fuji Xerox ApeosPort-IV C3373 Administration Guide

16 Appendix
648
Appendix
16
Layout 505 Sets the layout for printing.
[0] (Default) : Auto %
[2] : 2-up
[3] : 4-up
[4] : 100% (size-by-size)
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size.
The [2-up] setting prints two pages onto one sheet of paper. When [2-Up] is
selected, the paper size is fixed at A4.
The [4-up] setting prints four pages on each sheet of paper. When [4-Up] is
selected, the paper size is fixed at A4.
Paper size 506 Sets the size of the paper to be printed.
[0] (Default) : Auto
[1] : A4
The [Auto] setting automatically determines the paper size, based on the size
and settings of a PDF file to be printed.
Output color 507 Sets whether to print in color or monochrome.
[0] (Default) : Auto
[1] : Black
The [Auto] setting automatically determines the output color: color or
monochrome for each page. If colors other than black and white are used on
the original, the machine prints the document in color, and if only black and
white are used on the original, the machine prints in monochrome.
Setting Item
Item
Number
Value

Fuji Xerox ApeosPort-IV C3373 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Memory (Standard)	2 GB
Fax Transmission Speed	33.6 kbps
Print Speed	33 ppm
Scan Speed	55 ipm
Network Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Size	A3, A4, A5