Fuji Xerox ApeosPort-IV C3373 User Manual

Job Assembly
157
Copy
3
Job Assembly
This section describes the features you can select on the [Job Assembly] screen. The
following shows the reference section for each feature.
Build Job (Processing Documents Scanned with Different Settings as One Job) .........................................................157
Sample Job (Checking the Finished Output of the Copy)...................................................................................................161
Combine Original Sets (Adding Originals) .............................................................................................................................162
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area).........................................................165
Stored Programming (Calling a Stored Program for Build Job) .......................................................................................166
1 Select [Copy] on the [Services Home] screen.
2 Select a feature on the [Job Assembly] screen.
Build Job (Processing Documents Scanned with Different Settings as One
Job)
This feature allows you to apply different copy settings to each document page or each
document stack, and then output the copies as one job.
1 Select [Build Job].
2 Select [On].
3 Select any option.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.

Fuji Xerox ApeosPort-IV C3373 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Memory (Standard)	2 GB
Fax Transmission Speed	33.6 kbps
Print Speed	33 ppm
Scan Speed	55 ipm
Network Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Size	A3, A4, A5