Printing and Deleting Stored Jobs
421
Job Status
11
Note • This feature may not appear depending on the settings in the System Administration mode.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Undelivered Faxes].
2 Select the job to be re-sent or deleted.
Note • Select [Refresh] to display the updated
information.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Scroll the list by drag or flick operation to
switch the screen to be displayed. For
information on how to drag or flick, refer to
"Touch Screen" (P.90).
3 Select any option.
To re-send to the previously specified fax
number, press the <Start> button.
îš„ Delete This Fax
Deletes the undelivered fax job.
Refer to "When [Delete This Fax] is Selected" (P.421).
îš„ Change Recipients
Allows you to change the fax recipient and re-send the undelivered fax job.
Refer to "When [Change Recipients] is Selected" (P.421).
When [Delete This Fax] is Selected
1
Select [Delete].
îš„ Delete
Deletes the undelivered fax job.
îš„ Cancel
Cancels deleting the undelivered fax job.
When [Change Recipients] is Selected
Specify a fax recipient for the undelivered fax job.
Besides the fax recipient, the following features can be changed on the control panel:
Important • If the fax recipient has been changed, header information will not be added even if [Transmission
Header Text] is set to [Display Header].
For information on how to specify fax recipients, refer to "Step 3 Specifying Destinations" (P.173).
z
Fax type
z
Starting Rate
To Next Page
Loading...
Need help?
General
