3 Basic Operation
80
Basic Operation
3
Changing the Default Settings
This section describes the basic system settings procedure.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4
Select a desired option.
Customize the settings by performing
operations as necessary. For some options,
select [Change Settings] to change the settings
or to enter characters through the screen
keyboard.
To Next Page
Loading...
