Customizing the Control Panel
21
Before Using the Machine
1
1
Select [Screen Default], and select
[Change Settings].
2
Select [Send from Mailbox].
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
Setting the Screen to be displayed after Auto Clear
Set the screen to be displayed after Auto Clear. You can select from [Last Selection
Screen] and [All Services].
1
Select [Screen After Auto Clear],
and select [Change Settings].
2
Select [Last Selection Screen] or
[All Services].
Customizing the [All Services] Screen
By selecting features and their positions, you can customize the [All Services] screen
that
is displ
ayed whe
n you pres
s the
<All Servi
ces> bu
tton on
the co
ntrol pane
l.
The following are the factory default features displayed on the [All Services] screen.
Note • Unsupported features will not be displayed on the screen. Abnormal features will be grayed
out on the screen.
z
Copy
z
Fax/Internet Fax
z
E-mail
z
Scan to Mailbox
z
Network Scanning
z
Scan to PC
z
Send from Mailbox
z
Stored Programming
z
Job Flow Sheets
z
Language
z
Setup
z
Calibration
z
Activity Report
z
Fax Receiving Mode
z
Print Mode
1
Select [All Services], and select
[Change Settings].
2
Select [Language].
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
To Next Page
Loading...
Need help?
General
