Error Code
403
Problem Solving
14
124-701
O [Cause] The output destination was changed to the center tray due
to the malfunction of the specified output tray (Side tray).
[Remedy] Contact our Customer Support Center. Any trays other
than the defective output tray can be used.
124-702
O [Cause] The output destination was changed to the center tray due
to the malfunction of the specified Finisher tray.
[Remedy] Contact our Customer Support Center. Any trays other
than the defective output tray can be used.
124-705
O [Cause] The punch setting was cancelled.
[Remedy] Check the punch position, and try again.
124-706
O [Cause] The folding setting was cancelled.
[Remedy] Check the folding setting, and try to print again.
124-708
O [Cause] The output tray was changed to the center tray because
the size of the paper used was different from the size
specified for the 2-Sided feature.
[Remedy] Check if the specified size paper has been loaded in a
paper tray.
124-709
O [Cause] The document exceeded the maximum number of pages
that can be stapled.
[Remedy] Reduce the number of pages, or cancel the stapling
setting, then try to print again.
124-710
O [Cause] The output destination was changed from the mailbox
because the mailbox does not support the specified paper
size.
[Remedy] Specify the paper size that the mailbox supports.
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
O [Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the problem persists,
contact our Customer Support Center.
133-226
O [Cause] An unsupported country code was specified.
[Remedy] Contact our Customer Support Center.
133-280
133-281
133-282
133-283
O [Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the problem persists,
contact our Customer Support Center.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
To Next Page
Loading...
Need help?
General
