3 Copy
122
Copy
3
[Image Rotation - Rotation Direction] Screen
This screen allows you to set the reference position for rotation.
1 Select any option.
îš„ Staple Position
This option is displayed when the finisher is installed. If documents are of mixed
orientations, the images will be rotated to match the stapling edge specified in the settings
of the Staple feature.
îš„ Portrait Original - Left Edge
If documents are of mixed orientations, the images will be rotated so that the top edge of
landscape documents is aligned with the left edge of portrait documents.
îš„ Portrait Original - Right Edge
If documents are of mixed orientations, the images will be rotated so that the top edge of
landscape documents is aligned with the right edge of portrait documents.
To Next Page
Loading...
Need help?
General
