Ground Fault Interrupter
55
Product Overview
2
Ground Fault Interrupter
The machine is provided with a ground fault interrupter.
In the event of a current leakage, the ground fault interrupter will automatically cut off the
power circuit to prevent any leakage or fire from occurring.
Check that the ground fault interrupter works properly at least once a month.
If you have any problems with the ground fault interrupter, contact our Customer Support
Center.
The following describes how to check the ground fault interrupter.
1 Press the power switch to the [ ] position to
switch the power off.
2 Make sure that the touch screen is blank and the <Energy Saver> button does not light up.
3 Open the front cover.
4 Press the main power switch to the [ ]
position to switch the main power off.
5 Press the <TEST> button lightly with a sharp
edge such as a pen tip. The depressed <RESET>
button will stick out again.
If the <RESET> button sticks out, the ground
fault interrupter is properly working. If the
<RESET> button remains in the depressed
position, the ground fault interrupter has a
problem.
<RESET> button
<TEST> button
To Next Page
Loading...
Need help?
General
