4 Fax
170
Fax
4
z
Remote Folder
z
Remote Polling
z
Manual Send
z
Relay Broadcast
z
Sorting received faxes by folder (Folder Selector)
z
Direct Fax
If you are using the fax gateway feature, you can set the Starting Rate and F Code. For more information on the fax gateway
feature, refer to "Sending Internet Fax to regular fax machines via a relay station" (P.173).
Sending Internet Fax
The following describes how to send Internet Fax.
Important • The Cc, Bcc, and Reply To features are not available for Internet Fax.
Note •The machine converts documents to the TIFF format and then sends them as e-mail attachments.
1 Select [Internet Fax].
2 Select [New Recipients].
3 Specify a recipient with up to 128 characters
using the keyboard displayed on the touch
screen.
Important • If you specify a fax number, the data will not be sent.
• To specify an e-mail address for Direct Internet Fax, use the following format:
- When specifying a host name, enter FQDN to the right of the @ symbol.
Example: local-part@device.domain.com
- When specifying an IP address, enter the IP address with brackets ("[", "]") to the right of the @
symbol.
Example: local-part@[192.168.0.101]
Note •You can use address numbers, one touch buttons, group dial numbers, or the Address Book to
specify e-mail addresses. For more information, refer to "Speed Dialing (Specifying a Destination
Using an Address Number)" (P.191), "Specifying a Destination using a One Touch Button" (P.195),
and "Specifying a Destination Using the Address Book" (P.187).
4 Enter a subject and message if necessary.
To Next Page
Loading...
