EasyManua.ls Logo

Fuji Xerox docucentre-iv C4470

Fuji Xerox docucentre-iv C4470
673 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web Applications Service Setup (ApeosPort Series Models Only)
229
Tools
5
3 Enable SSL/TLS communication.
1) Click [SSL/TLS Settings].
2) Select the [Enabled] check box for [HTTP - SSL/TLS Communication].
3) Select the [Enabled] check box for [Verify Remote Server Certificate].
4) Click [Apply].
5) When the right frame on the web browser will change to the machine reboot
display, click [Reboot Machine]. The machine reboots and the setting values are
enabled.
4 Import the root certificate of the remote server.
1) Refresh the web browser to reload CentreWare Internet Services.
Note An address beginning with "https" instead of "http" is displayed in the address box in the web
browser.
2) Click the [Properties] tab.
3) Click [ ] on the left of [Security] to display the items in the folder.
4) Click [Machine Digital Certificate Management].
5) Click [Upload Signed Certificate].
6) Enter a file name you want to import, or select a file to be imported from a dialog
box displayed by clicking the [Browse] button.
7) Click the [Import] button.
After a short while, [Settings have been changed.] is displayed.
8) Refresh the web browser to reload CentreWare Internet Services.
5 Confirm that the certificate has been imported.
Otherwise, proceed to step 6.
1) Click [Certificate Management].
2) Select [Trusted Certificate Authorities] for [Category], and then click the [Display
the list] button.
3) Select the check box next to the certificate you want to confirm.
4) Click the [Certificate Details] button.
6 Configure connection settings for the remote server.
1) Click the [Properties] tab.
2) Click [ ] on the left of [General Setup] to display the items in the folder.
3) Click [Internet Services Settings].
4) Configure connection settings for the remote server.
5) Click [Edit].
Configure connection settings for the remote server again.
Important Enter an address beginning with "https" instead of "http" into the address box in the web
browser.
6) Click [Apply].
After a short while, [Settings have been changed.] is displayed.

Table of Contents

Related product manuals