Specifications
569
Appendix
15
* Finisher-A1 cannot be installed for ApeosPort-IV C5570/C4470 or DocuCentre-IV C5570/C4470.
Finisher-B1 (optional)
*1 Based on when larger size paper is stacked on paper.
Staple Capacity: A4: 50 sheets (90 gsm or less),
B4 or larger: 30 sheets (90 gsm or less)
Paper Size: Maximum A3, 11 × 17" / Minimum B5
Position: 1 place (front/angled stapling)
Important • When using 80 gsm paper
Dimensions/Weight Width 559 × Depth 448 × Height 246 mm, 12 kg
Space Requirement
(when connected to the
main unit)
Width 1,129 × Depth 685 mm (main unit + Finisher-A1, when the
extension tray and the bypass tray are fully extended)
Type Finisher tray × 1: Sorting (Offset available)/
Stacking (Offset available)
Paper Size/Paper
Weight
Finisher tray Maximum: A3, 11 × 17"
Minimum: B5, 55 - 220 gsm
Stacker Capacity Finisher tray (For paper not stapled)
A4: 2,000 sheets
B4 or larger: 1,000 sheets
Mixed stack*
1
: 300 sheets
Finisher tray (For paper stapled)
A4: 100 sets or 1,000 sheets
B4 or larger: 75 sets or 750 sheets
Center binding/folding
*2
: 50 sets or 600 sheets
Folding
*2
: 500 sheets
Important • When using 80 gsm paper
Staple Capacity: 50 sheets (90 gsm
or less)
Paper size: Maximum: A3, 11 × 17", Minimum: B5
Position: 1 place (front: angled stapling, back: straight
stapling), 2 places (parallel stapling)
Important • When using 80 gsm paper
Punch
*3
Paper size: A3, 11 × 17", B4, A4, A4 , 8.5 × 11",
8.5 × 11" , B5
Number of Holes: 2/4 holes, or US 2/3 holes
Paper Weight: 55 - 200 gsm
Important • When using 80 gsm paper
Booklet Finishing
*2
Capacity: 15 sheets (center binding), 5 sheets (folding)
Paper Size: Maximum: A3, 11 × 17", Minimum: A4, 8.5 × 11"
Paper Weight: 64 - 80 gsm
(center binding), 64 - 105 gsm
(folding)
Important • When using 80 gsm paper
Dimensions/Weight Width 620 × Depth 552 × Height 987 mm, 28 kg
Width 620 × Depth 597 × Height 1,057 mm, 37 kg (When the
Booklet Maker Unit is attached)
Space Requirement
(when connected to the
main unit)
Width 1,666 × Depth 685 mm (Main unit + Finisher-B1, when the
extension tray and the bypass tray are fully extended)
Width 1,666 × Depth 695 mm (Main unit + Finisher-B1 + Booklet
Maker Unit, when the extension tray and the bypass tray are fully
extended)
To Next Page
Loading...
