EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-IV C5570

Fuji Xerox DocuCentre-IV C5570 Administrator's Guide

Fuji Xerox DocuCentre-IV C5570
673 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #355 background imageLoading...
Page #355 background image
Configuration of Encryption using IPSec
353
Encryption and Digital Signature Settings
12
2 Import a certificate.
Important • You cannot import a certificate that has been already registered in [Local Device] or
[Others]. Delete the registered certificate before importing.
• If the certificate to be imported contains the V3 extension "keyUsage", "digitalSignature"
must be asserted.
1) Click the [Properties] tab.
2) Click [ ] on the left of [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click [Upload Signed Certificate].
5) Enter [Password].
6) Enter [Retype Password].
7) Enter a file name you want to import or select a file to import from a dialog box
displayed by clicking the [Browse] button, and then select [Save].
8) Click the [Import] button.
9) Refresh the web browser.
3 Configure the certificate.
1) Click [ ] on the left of [Security].
2) Click [Certificate Management].
3) Select [Local Device] for [Category] and [IPSec] for [Certificate Purpose], and then
click the [Display the list] button.
4) Select the check box next to the certificate to set.
5) Click the [Certificate Details] button.
6) Click the [Use this certificate] button.
7) Click [Reboot Machine]. The machine reboots and the settings are enabled.
Step2 Configuration on the Machine (Configuration of IPSec)
The following describes configuration procedures to set up IPSec on the machine.
1 Press the <Log In/Out> button.
2 Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the [Services Home] screen.
4 Select [Connectivity & Network Setup].
5 Select [Security Settings].
6 Select [IPSec Settings].
7 Configure the required settings.
For details on the settings, refer to "IPSec Settings" (P.191).

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C5570

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-IV C5570 and is the answer not in the manual?

Fuji Xerox DocuCentre-IV C5570 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-IV C5570
CategoryAll in One Printer
LanguageEnglish

Related product manuals