Notes and Restrictions
633
Appendix
15
destination URL if [Automatic prompting for file downloads] is set to [Disable] under
[Tools] > [Internet Options] > [Security] > [Custom Level] > [Automatic prompting for
file downloads] with your Internet Explorer.
z
When you use Internet Explorer, even if you click "To delete file, click here." in the
[Document Acquisition] screen of the Store & Send Link service, file deletion may not
be performed. In this case, use another browser than Internet Explorer to delete the
file.
îš„Split Files
You cannot select [Single File for Each Page] when using the Store to Folder or Job
Flow feature.
îš„Thumbnail View
Files in a folder may not be displayed in thumbnail view in the following cases. In those
cases, display them in list view.
- Some file is not displayed in thumbnail view even though it is stored in the folder.
- Characters and images are not correctly displayed because they are scaled down
from the actual sizes.
z
The orientation of an image displayed in thumbnail view depends on which
orientation the document was stored in.
z
If the power is cut off immediately after a scanned file is stored in a folder, or if the
hard disk space is insufficient to display thumbnails, files in the folder may not be
displayed in thumbnail view. In that case, display them in list view.
Notes and Restrictions on the Use of the Fax Feature
îš„Settings on Manual Fax Transmissions
Manual fax transmissions are performed in accordance with the settings in [Fax
Defaults]. If you change settings on the fax screen before the calling screen appears,
the settings become effective.
îš„Relay Broadcast
The machine has the function of a relay station but does not have the function of a
repeater station.
The machine does not support G4 communications, but if a relay station supports G4
communications, the machine can select a G4 communication function that a relay
station performs as an instruction for relay broadcast.
îš„Features Supported by F Code Communication
F Code communication supports the following features: the Send Fax - Remote Folder,
Secure Polling, Store File - Local Folder, Relay Broadcast, and Remote Relay
Broadcast features.
îš„Fax Immediate Reception
If the machine's memory capacity becomes insufficient to receive fax data, the machine
automatically switches into immediate reception mode. In this mode, the machine
outputs received documents on a page-by-page basis; each document page is output
immediately after the machine finishes receiving it. However, if the machine receives
large data, such as an A3 size photo with many halftone levels, the machine may not
print it even after the machine finishes receiving it. In that case, press the <Stop>
button, or turn the machine off and then on again, to have the machine print the
document.
To Next Page
Loading...
Need help?
General
