Fuji Xerox DocuCentre-IV C5570 Administrator's Guide

Machine Trouble
403
Problem Solving
14
Unable to print
text correctly.
(Text is garbled.)
Non-standard fonts are
used for printing.
Check the application or print driver
settings. If PostScript (optional) is being
used, download the required fonts.
Unable to insert
or remove a
paper tray.
Did you open a cover or turn
the machine off during
printing?
Do not forcibly insert or remove the paper
tray. Switch off the power. In a few
seconds, switch on the power. When the
machine is ready to receive data, insert or
remove the paper tray.
Unable to copy
with the specified
size.
Is the document glass or the
document cover dirty?
Clean the document glass and the
document cover.
Refer to "Cleaning Document Cover and
Document Glass" (P.82).
Is the document a
transparent type such as a
transparency film?
Place the document on the document
glass, and place a white sheet on top of
the document when copying.
Is the document in the
correct position?
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Adjust the document guide positions.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Is the document folded? Unfold and correctly load the document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Is the document a non-
standard size?
Specify the document size.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Symptom Cause Remedy

Fuji Xerox DocuCentre-IV C5570 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV C5570
Category	All in One Printer
Language	English