Paper Types
39
Paper and Other Media
2
*1:Select the paper type setting for the paper loaded on a tray. For more information, refer to "Changing
the Paper Settings" (P.53).
*2:Most ideal image quality with the paper can be obtained by setting the image quality for each type of
paper. For more information on the settings, refer to "Image Quality" (P.140).
Note • For more information on special paper such as other heavyweight paper, contact our
Customer Support Center.
P801 A4 Unknown Trans-
parency
-
z
The paper is charged with
static electricity after a copy
or print job.
z
When using Tray 5, insert
another type of paper at the
bottom of the stack before
loading transparencies.
24Up A4 Unknown Labels -
z
Print one sheet at a time,
using Tray 5.
z
Do not reuse the used label
or partially peeled label.
8Up A4 Unknown Labels -
z
Print one sheet at a time,
using Tray 5.
z
Do not reuse the used label
or partially peeled label.
1Up A4 Unknown Labels -
z
Print one sheet at a time,
using Tray 5.
z
Do not reuse the used label
or partially peeled label.
Laser card
040P00142
A4 Card 100 Heavy-
weight
Extra
Heavyweight A
z
When using Tray 5, load the
paper with the center slightly
curling upward.
z
When using the Finisher-A1
to deliver the output, load the
paper with the edge without a
card attached facing the
feeding slot of the tray.
Universal
Transparency
Plain 115MIC
A4 Unknown Trans-
parency
-
z
If two or more sheets of
transparencies are being fed
simultaneously (double-
feed), load one sheet at a
time.
V510 A4 Unknown Trans-
parency
-
z
Transfer deterioration might
be occurred when copying or
printing in color. Also, toner
may spatter on color images
in prints.
z
When using Tray 5, insert
another type of paper at the
bottom of the stack before
loading transparencies.
16Up A4 Unknown Labels -
Paper Name Size
Basis Weight
(gsm)
Paper
Type
*1
Image
Quality
*2
Notes / Countermeasure
To Next Page
Loading...
Need help?
General
