Fuji Xerox DocuCentre-IV C5570 Administrator's Guide

Trouble during Scanning
427
Problem Solving
14
The image is not
the desired size.
The document glass or the
document cover is dirty.
Clean the document glass or the document
cover.
Refer to "Cleaning Document Cover and
Document Glass" (P.82).
The document is a
transparent type such as a
transparency film.
Place a white sheet of paper on top of the
document when scanning.
The document is
misaligned.
Load the document correctly.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
The document guides on
the document feeder are not
set in the correct positions.
Load the document correctly, and align the
document guides to the document.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
The document is a non-
standard size.
Specify the document size.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
The document is folded. Flatten the curl and load the document
again.
Refer to "5 Scan" > "Scanning Procedure" in
the User Guide.
The image is not
scanned in color.
[Color Scanning] is set to
[Black & White], or
[Grayscale].
Set [Color Scanning] to [Color].
Refer to "5 Scan" > "E-mail" in the User
Guide.
The image is
coarse.
The resolution is too low. Set the resolution higher.
Refer to "5 Scan" > "Layout Adjustment" in the
User Guide.
Image is saved with high
compression.
Select a lower compression ratio in
[Quality/File Size].
Refer to "5 Scan" > "E-mail Options/Filing
Options" in the User Guide.
Black-and-white
gradation is not
reproduced
properly.
[Black & White] is selected
for [Color Scanning].
Set [Color Scanning] to [Grayscale].
Refer to "5 Scan" > "E-mail" in the User
Guide.
Symptom Cause Remedy

Fuji Xerox DocuCentre-IV C5570 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV C5570
Category	All in One Printer
Language	English