Fuji Xerox DocuCentre-IV C5570 Administrator's Guide

Specifications
571
Appendix
15
Finisher-C1 with Booklet Maker (optional)
Type Output tray × 1 : Sorting/Stacking
Finisher tray × 1 : Sorting (Offset available)/
Stacking (Offset available)
Booklet tray × 1 : Sorting/Stacking
Paper Size/Paper
Weight
Output tray Maximum : 12.6 × 17.7", 12 × 19",
Minimum : B5, 55 - 220 gsm
Finisher tray Maximum : 12.6 × 17.7", 12 × 19",
Minimum : B5, 55 - 220 gsm
Booklet tray Maximum : A3, 11 × 17",
Minimum : A4, 8.5 × 11", 64 - 90 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
A4: 1,500 sheets
B4 or larger: 1,500 sheets
Mixed stack*
1
: 300 sheets
Finisher tray (For paper stapled)
A4: 200 sets or 1,500 sheets
B4 or larger: 100 sets or 1,500 sheets
Booklet tray 20 sets
*2
*1 Based on when larger size paper is stacked on paper.
*2 The amount of paper listed above may vary depending on the
conditions, such as the paper type.
Important • When using 80 gsm paper
Staple Capacity: 50 sheets (90 gsm or less)
Paper Size: Maximum: A3, 11 × 17", Minimum: B5
Position: 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper
Punch Paper size: A3, 11 × 17", B4, A4, A4 , 8.5 × 11",
8.5 × 11" , B5
Number of Holes: 2/4 holes (Option: US 2/3 holes)
Paper Weight: 55 - 220 gsm
Important • When using 80 gsm paper
Booklet Finishing Maximum number of sheets: 15 sheets
*1
,
5 sheets (center folding),
1 sheet (single folding)
Paper size: Maximum: SRA3, 12 × 18",
Minimum: A4, 8.5 × 11"
Paper type: 64 - 90 gsm
*2
,
64 - 105 gsm (center folding),
64 - 220 gsm (single folding)
*1 14 sheets when attaching a cover. In the case of center folding, the
maximum number of sheets can be changed by the customer
engineer.
*2 Up to 220 gsm paper can be used for covers. When 91 to 220 gsm
paper is used for a cover, paper that can be used for body contents
becomes 64 to 80 gsm.
Important • When using 80 gsm paper
Dimensions/Weight Width 876 × Depth 639 × Height 1,058 mm, 90 kg
Space Requirement
(when connected to the
main unit)
Width 1,922 × Depth 685 mm (Main unit + Finisher-C1 with
Booklet Maker, when the extension tray and the bypass tray are
fully extended)

Fuji Xerox DocuCentre-IV C5570 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV C5570
Category	All in One Printer
Language	English