Fuji Xerox DocuCentre-IV C5575 User Manual

Calling a Stored Program
381
Stored Programming
8
Calling a Stored Program
The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered the
stored program appears.
1 Press the <Services Home> button.
2 Select [Stored Programming].
3 Select a number of a stored program
containing the features you want to use.
Note • You can only select registered numbers.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• After the stored program has been called, the
machine sounds an audible tone. If a failure
occurs, the machine sounds a fault tone.
For information on how to change the volume of the sound that
notifies that a stored program has been called, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored
Programming Complete Tone" in the Administrator Guide.
4 After the stored program is called, select other features if necessary.
5 Press the <Start> button.
<Services Home> button
<Start> button

Fuji Xerox DocuCentre-IV C5575 Specifications

General

Print Resolution	1200 x 2400 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Type	Color Laser Multifunction Printer
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Print Speed (Black/Color)	55 ppm / 50 ppm
Connectivity	Ethernet, USB
Monthly Duty Cycle	300, 000 pages
Paper Size	A3, A4, A5, B4, B5
Copy Speed (Black/Color)	55 cpm / 50 cpm
Operating System Compatibility	Windows, Mac, Linux