50
Problem Solving
024-718
[Cause] Incompatible print parameters are used. The combination of the specified
features such as Document Size, Paper Size, Paper Tray, 2 sided printing, and
Output Tray is incompatible.
[Remedy] Confirm the print data, and try printing again.
026-737
[Cause] A network error occurred.
[Remedy] Consult your network administrator whether the network or the server has any
problem.
027-518
[Cause] Failed to login the forwarding destination.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-520
[Cause] Invalid characters are used or the specified path is not found.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-522
[Cause] Unable to write in the forwarding destination.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-528
[Cause] Data could not be written to the shared folder because the computer’s hard disk
is full.
[Remedy] Press the control panel's <Stop> button, and delete any unneeded data to create
room on the hard disk.
027-543
[Cause] The SMB server (NetBIOS) name is invalid.
[Remedy] Check whether the server name of the SMB server is correct, or press the control
panel's <Stop> button to cancel the job.
042-325
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
042-400
[Cause] The odor filter life is over.
[Remedy] Contact our Customer Support Center.
042-614
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power.
045-310
[Cause] An error occurred.
[Remedy] Removed the jammed paper.
045-313
047-218
061-321
061-325
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
062-277
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
062-311
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
Error Code Cause and Remedy
To Next Page
Loading...
