51
Problem Solving
062-360
062-371
062-380
062-386
062-389
062-393
062-396
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
071-105
[Cause] An error occurred in the left cover [A] or Tray 1.
[Remedy] Remove the jammed paper.
072-102
[Cause] An error occurred in the one tray module cover [B] or Tray 2.
[Remedy] Remove the jammed paper.
072-105
[Cause] A paper jam occurred in the one tray module cover [B].
[Remedy] Remove the jammed paper.
072-210
072-212
072-215
072-461
072-470
[Cause] An error occurred in Tray 2 (One Tray Module).
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
073-102
[Cause] A paper jam occurred in the two tray module cover [C] or Tray 3.
[Remedy] Remove the jammed paper.
073-104
[Cause] A paper jam occurred in the one tray module cover [B] or the two tray module
cover [C].
[Remedy] Remove the jammed paper.
073-105
[Cause] A paper jam occurred in the one tray module cover [B].
[Remedy] Remove the jammed paper.
073-210
[Cause] An error occurred in Tray 3 (Two Tray Module).
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
074-101
074-103
[Cause] A paper jam occurred in the two tray module cover [C] or Tray 4.
[Remedy] Remove the jammed paper.
074-104
[Cause] A paper jam occurred in the one tray module cover [B] or the two tray module
cover [C].
[Remedy] Remove the jammed paper.
074-105
[Cause] A paper jam occurred in the one tray module cover [B].
[Remedy] Remove the jammed paper.
074-210
[Cause] An error occurred in Tray 4 (Two Tray Module).
[Remedy] Switch off the machine power, make sure that the display is blank, and then
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
Error Code Cause and Remedy