164 7 Maintenance
12. After entering the values, press the <Eject/
Set> button to confirm your entry.
The display returns to the screen shown on
the right.
13. Enter the values for the slow scan.
Press the < > button to display [Slow
Scan].
14. Press the < > or <Eject/Set> button to
accept the selection.
A screen that allows you to enter the
adjustment values for the slow scan is
displayed.
15. Enter the values using the < > and < >
buttons. Use the < > button to move the
cursor.
(Example: M=+2)
16. After entering the values, press the <Eject/
Set> button to confirm your entry.
The display returns to the screen shown on
the right.
17. When you are finished with the settings,
press the <Menu> button to return to the
print screen.
After changing the adjustment values, reprint the Color Registration Chart using the
procedure in "Printing the Color Registration Chart" (P. 161).
If the value is not “0” for each color, perform the color registration again.
Enter Adjustment
Fast Scan
Enter Adjustment
Slow Scan
Slow Scan
Y= 0 M= 0 C= 0
Slow Scan
Y= 0 M=+2 C= 0
Enter Adjustment
Slow Scan
To Next Page
Loading...
Need help?
General
