80 4 Paper
Notes on Loading Envelopes
The printer can print on envelopes only on the address side, and not on the reverse side.
The following explains notes on loading envelopes in the manual feeder or the tray 1.
Important
• For best print quality, do not use envelopes that:
• are curled or twisted.
• are stuck together or damaged.
• have windows, holes, perforations, cutouts, or embossments.
• use tie strings, metal claps, or metal folding bars.
• have postage stamps attached.
• have any exposed adhesive when the flaps are in the sealed position.
• have deckle edges or creased corners.
• have rough, cockled, or laid finishes.
Feed Orientations for an Envelope in the Manual Feeder
When loading an envelope in the manual feeder, be sure to load it in the correct orientation.
Monarch/DL/COM-10 C5
Load an envelope with the address side facing
down and the edge with the flap on your right.
Make sure that the flap is closed.
Load an envelope with the address side facing
down and the edge with the flap facing toward
you. Make sure that the flap is completely open.
Note
• When setting the margins on your application,
add length of the flap (from the top edge to the
fold line) to the margin on the flap side.
To Next Page
Loading...
Need help?
General
