Fuji Xerox DocuPrint C1110 User Manual

94 5 Control Panel Menus
PDF
Specifies the settings for PDF.
Toner Refresh Refreshes the toner cartridges by forcing to consume toner in the toner cartridges.
When the printed image is light, the toner cartridge refreshing may solve this printing
problem.
Refer to
• "Toner Cartridge Refreshing" (P. 168)
Drum Refresh Reduces the light fatigue of the drum cartridge that is caused by exposure to light while
leaving the front cover open.
Refer to
• "Drum Cartridge Refreshing" (P. 169)
Print Meter Initializes the meter counts.
Initialize NVM Initializes the settings stored in the NVM except for the network settings. The NV
memory is nonvolatile memory that retains the settings of the printer even when its
power is switched off. After executing this function and restarting the printer, all the
menu options are reset to their default values.
Note
• You cannot execute this menu during printing.
• You need to restart the printer to activate this setting. After making the setting, switch
the printer off and then on again.
Storage Disk Clears the RAM disk (optional). Use this menu to delete all of the data in the RAM disk.
Note
• [Storage Disk] appears only when additional memory (optional) is installed.
Item Description
Quantity Sets the print quantity.
• [1 Set (s)] to [999 Set (s)] (default: [1 Set (s)])
Note
• Depending on the protocol used for file transmission, the value specified on the
protocol may override the [Quantity] setting.
Print Mode Sets the print mode to one of the followings:
• [Normal] (default)
Prints documents at standard speed with standard image quality.
• [High Quality]
Produces higher image quality than [Normal], but at a lower print speed.
• [High Speed]
Prints documents at a higher speed than [Normal].
Password Before printing a password-protected PDF, set the password here. The file will be
printed only if its password matches the password you set here.
The password can be up to 32 alphanumeric characters.
Collated Sets whether to collate multiple-set documents. (1, 2, 3..., 1, 2, 3...)
• [Off] (default)
• [On]
Output Size Sets the output paper size.
•[Auto]
Automatically determines the output size based on the size and settings of your PDF
file.
• [A4] or [8.5 x 11"] (default)
Displays either [A4] or [8.5 x 11"] depending on the option selected under
[Admin Menu] > [System Settings] > [DefaultPaperSize].
Item Description

Fuji Xerox DocuPrint C1110 Specifications

General

Brand	Fuji Xerox
Model	DocuPrint C1110
Category	Printer
Language	English