71 Printing Basics
• When Loading C5, Nagagata 3/4 or Kakugata 3
Load envelopes with the side to be printed on facing up, flap opened, and facing you.
IMPORTANT:
• Never use envelopes with windows, or coated linings. These lead to paper jams and can cause damage to the
printer.
NOTE:
• If you do not load envelopes in the multipurpose feeder (MPF) right after they have been removed from the
packaging, they may bulge. To avoid jams, flatten them as shown below when loading them in the
multipurpose feeder (MPF).
• If envelopes are still not fed correctly, add some bending to the flap of the envelopes as shown in the following
illustration.
The amount of the bending shall be 5 mm (0.20 inches) or less.
To Next Page
Loading...
