Using the Operator Panel 94
Light Sequences
The following table shows the light status.
12 Printer Status
Error Ready
— Ready
The toner is low.
See also:
• "Replacing the Toner Cartridge" on page 134
— Downloading
Warming up after power on
Receiving data, Waiting for data, Printing
Printing when the toner is low.
See also:
• "Replacing the Toner Cartridge" on page 134
Returning from Sleep mode
— In Power Saver mode
See also:
• "Power Saver Mode" on page 35
No paper is loaded.
Load paper, and then press the button on the operator panel.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)"
on page 66
The wrong size of paper is loaded.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)"
on page 66
Paper jam occurred.
See also:
• "Clearing Jams" on page 98
Waiting for manual duplex printing
*1
Canceling job
In Initialize NVM mode
See also:
• "Resetting to Factory Defaults" on page 92
To Next Page
Loading...
