Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Manage Your Network Machine Securely Using Web Based Management
Manage Your Network Machine Securely Using Web Based Management
To manage your network machine securely, you must use management utilities with security protocols.
We recommend using the HTTPS protocol for secure management. To use this protocol, HTTPS must be
enabled on your machine.
• The HTTPS protocol is enabled by default.
• You can change the HTTPS protocol settings using the Web Based Management screen.
1. Click the Network tab.
2. Click the Protocol menu in the left navigation bar.
3. Click HTTP Server Settings.
1. Start your web browser.
2. Type "https://Common Name" in your browser's address bar (where "Common Name" is the Common Name
that you assigned to the certificate; this could be your IP address, node name, or domain name).
3. Type a password, and then click
. The default password is "x-admin". To ensure security, it is important
you change the password.
4. You can now access the machine using HTTPS.
• If you use the SNMPv3 protocol, follow the steps below.
5. Click the Network tab.
6. Click Protocol.
7. Make sure the SNMP setting is enabled, and then click Advanced Settings.
8. Configure the SNMP settings.
There are three options for SNMP Mode of Operation.
• SNMP v1/v2c read-write access
160
To Next Page
Loading...
Need help?
General
