• DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may
cause the paper to jam or misfeed.
• When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by
completing the following step:
- Press [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
5. Make sure the paper is below the maximum paper mark (b b b).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
7. Lift the support flap to prevent paper from sliding off the output tray.
8. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
Related Information
• Load and Print Using the Paper Tray
18
To Next Page
Loading...
