897N102548
Power ON/OFF
Power ON
Power OFF
FCR PRIMA T2 (CR-IR 392)
Quick Guide
X-ray Exposure
Registration of patient information
Select Exposure menu
X-ray exposure and image conrmation
Leave 10 cm (4 in.) or more space at both sides
of the Image Reader to allow the cooling fans
inside to intake and exhaust air.
1
1
Power ON
The monitor lamp changes from
orange to blue.
2
Power ON
After the Console (PC) has
booted, an application starts.
1
Click
When is clicked, the
conrmation window is shown.
2
Click
Conrm that “Shut-
down the PC” is se-
lected and click [OK].
3
Power ON
Equipment initialization starts.
3
Check
When the Console (PC) shuts
down, the power supply is
switched off automatically.
To switch off the power
independently, press the
(Stand-by Switch) for
approximately 4 seconds.
4
Power OFF
Turn off the Main Power Switch.
1
Select
Select the Exposure
menu.
The Read Image
window is displayed
automatically.
1
Register
Register Patient ID,
Patient Name, Sex,
and Date of Birth.
Click
when
the input of patient
information has been
completed.
1
X-ray Exposure
2
Image Reading
• Slowly insert the cas-
sette straight along
the guide at the right.
• Before inserting the
cassette, remove
the exposure marker
from the cassette.
3
Check
Start the Image Viewer
window and conrm
the image.
4
Click
When this is clicked,
the display returns to
the Main window.
When a printer is
connected, the image
is put out to lm.
To Next Page
Need help?
General
