63
Connections
Viewing Pictures on a Computer
1
If the pictures you wish to copy are stored
on a memory card, insert the card into the
camera (pg. 8). If no card is inserted, pictures
will be copied from internal memory.
A Note
Windows users may require the Windows CD
when starting the software for the first time.
C Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2
Turn the camera off and connect the supplied
USB cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USB hub or keyboard.
3
Press the D button for about a
second to turn the camera on.
MyFinePix Studio or FinePixViewer will
start automatically; follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click Cancel.
C Caution
If the software does not start automatically,
the software may not be correctly installed.
Disconnect the camera and reinstall the software.
For more information on using the supplied
software, start the application and select the
appropriate option from the Help menu.
Connecting the Camera
To Next Page
Loading...
