Need help?Do you have a question about the FujiFilm Fujica AX-1 and is the answer not in the manual?
General| Brand | FujiFilm |
|---|---|
| Model | Fujica AX-1 |
| Category | Digital Camera |
| Language | English |
Troubleshooting issues related to the film advance lever, including inability to turn or charge the shutter.
Diagnosing and resolving problems with the mirror not descending or ascending correctly.
Addressing problems with LED illumination, operation, and viewfinder display functionality.
Resolving issues with shutter speed accuracy, AE lock, and bulb mode operation.
Troubleshooting problems related to the self-timer and battery check system functionality.
Step-by-step guide to remove and disassemble the camera's top cover assembly.
Instructions for carefully removing and handling the camera's focusing screen.
Procedure for removing the amplifier assembly and associated electronic components.
Steps for disassembling and removing the lens mount base assembly.
Instructions for the removal of the mirror case assembly from the camera.
Procedure for removing the focal plane shutter assembly from the camera body.
Procedures for reassembling various parts relative to the camera body, including locks and springs.
Steps for assembling the film chamber door, including pin and pressure plate installation.
Detailed instructions for installing and assembling the focal plane shutter assembly components.
Procedures for assembling the mirror case and related parts, detailing quick return mechanism operation.
Steps for installing the lens mount base, lock pin, button, and mirror assembly.
Procedures for adjusting shutter blind traveling velocity and shutter speed using test equipment.
Guidance on installing electrical parts, wiring, and adjusting the camera's electrical system.
A systematic guide for diagnosing and repairing electrical system faults in the camera.
Methods for inspecting the camera's electrical system, including power switch and LED functionality.
Procedures for checking mechanical parts related to the camera body, such as film advance and rewind.
Steps for inspecting the viewfinder for image coincidence and general condition.
Checking the compatibility and correct installation of the Fujica Auto-Winder X.
Final checks on part settings, appearance, and adhesive application after inspection.
Special tool for adjusting the 45° mirror angle.
Tool for testing the 45° mirror angle against the film rail plane.
Adapter and master gauge for adjusting camera flangeback.
Specialized tool for adjusting variable resistors.
Tool for removing film rewind knob and nuts.
Tool used for removing specific screws, like screw (1-42).
Pliers used for removing focal plane shutter spring pins.
Tool for removing the winder coupler.
To Next Page