To Next PageTo Next PageWhat to do if my Fujitsu Airstage is leaking water?
If water leaks from your Fujitsu Air Conditioner, immediately stop using it. Disconnect all power by turning off the electrical breaker or disconnecting the power plug.
What to do if my Fujitsu Air Conditioner smells like burning or emits smoke?
If your Fujitsu Air Conditioner smells like something is burning or emits smoke, immediately stop using it. Disconnect all power by turning off the electrical breaker or disconnecting the power plug.
Why does my Fujitsu Air Conditioner operate differently from the remote controller setting?
There might be a few reasons why your Fujitsu Air Conditioner isn't working as expected based on the remote controller settings. The most common cause is exhausted batteries in the remote controller. Try replacing them to solve the issue.
Why is operation delayed after restarting my Fujitsu Airstage Air Conditioner?
If your Fujitsu Air Conditioner delays operation after a restart, it might be because the power supply was turned from Off to On suddenly. The compressor will not operate for about 3 minutes to protect the fuse.
How to register additional Fujitsu Air Conditioners?
To register additional air conditioners on your Fujitsu system, repeat the setup of your chosen mode as described in '9.2. Setting to use wireless LAN control' for each air conditioner.
What to do if I have not received the e-mail when registering my Fujitsu account?
To fix the issue of not receiving the registration email from Fujitsu, set the domain permissions to prevent it from being marked as spam.
What to do if Fujitsu Airstage Air Conditioner mobile app does not work?
If the Fujitsu mobile app isn't working, ensure that the OS version on your mobile device is supported.
How to register additional users on Fujitsu Airstage?
You can only register 1 Email address and password per W-LAN adapter.
General| Type | Split System |
|---|---|
| Energy Efficiency | High Efficiency |
| Refrigerant | R32 or R410A (varies by model) |
| Control | Remote control, Wi-Fi (optional) |
| Zones | Multi-Zone (varies by model) |
| Installation | Wall-mounted, Ceiling-mounted, or Cassette (varies by model) |
| Operating Modes | Cooling, Heating, Fan, Dehumidification, Auto |
| Indoor Unit Options | Wall-mounted, Ceiling Cassette |
| Features | Inverter Technology, Quiet Operation |
| Noise Level | Indoor: 19 - 45 dB |
| HSPF | Varies by model (typically 8 - 12) |
Details the components and functions of the indoor unit.
Describes the remote controller's functions and indicators.
Instructions for inserting batteries into the remote controller.
Details how to control the fan speed for optimal airflow.
Explains how to adjust vertical and horizontal airflow directions.
Sets up a weekly schedule for the air conditioner's operation.
Sets specific times for the air conditioner to turn on or off.
Combines On and Off timer settings within a 24-hour span.
Supports comfortable sleep by gradually adjusting temperature.
Saves electricity by adjusting the set temperature moderately.
Adjusts operation based on room occupancy detected by a sensor.
Reduces fan speed intermittently during cooling for power saving.
Operates at maximum power for quick cooling or warming.
Reduces noise from the outdoor unit by decreasing compressor speed.
Maintains room temperature at 50°F (10°C) to prevent excessive cooling.
Safety and operational guidelines for using wireless LAN.
Step-by-step guide to install app and register the air conditioner.
Sets custom codes to specify which air conditioner to control.
Instructions for cleaning the air filters and filter holders.
Procedures for cleaning deodorization filters and replacing specific filters.
Information on the optional wired remote controller.
