Fujitsu AMUG24LMAS Design & Technical Manual

¢
Input signal type
• Indoor unit
Input signal type is only "Edge".
Edge
• External input and output PCB
The input signal type can be selected.
Signal type (edge or pulse) can be switched by the DIP switch 2 (SW2) on the External input and
output PCB.
Edge
Pulse
The width of pulse must be
longer than 200 msec.
- 26 -
6-3. Combination of external input and output 6. External input and output
DUCT TYPE AMUG24-48LMAS DUCT TYPE AMUG24-48LMAS

Fujitsu AMUG24LMAS Specifications

General

Brand	Fujitsu
Model	AMUG24LMAS
Category	Air Conditioner
Language	English