Fujitsu AO 45LJBYL Series User Manual

5-5. INDOOR FAN CONTROL
1. Fan speed
( Table 5 : Indoor Fan Speed )
Operation mode Air flow mode Speed (rpm)
Hi 1040
890
750
595
Me
Lo
Heating
S-Lo
2. FAN OPERATION
The airflow can be switched in 4 steps such as AUTO, LOW, MED, HIGH, while the indoor
fan only runs.
When [AUTO] is selected, the indoor fan motor runs LO and OFF at 1 minute intervals.
05-05
Cooling
3. COOLING OPERATION
Switch the airflow [AUTO], and the indoor fan motor will run according to a room temperature,
as shown in Figure 5.
On the other hand, if switched in [HIGH] [LOW], the indoor motor will run at a constant airflow of [COOL]
operation modes LOW, MED, HIGH,as shown in Table 5.
( Fig.5 : Airflow change - over ( Cooling : AUTO ) )
When the room
temperature rises
When the room
temperature drops
TR : Room temperature
Ts : Setting temperature
TR-Ts > 2 degC
=
1 degC > TR-Ts
2 degC > TR-Ts > 1 degC
=
TR-Ts > 3 degC
=
2 degC > TR-Ts
3 degC > TR-Ts > 2 degC
=
HIGH mode
MED mode
LOW mode
*1
*1 : Contains a condition to the following
When the operation mode is set to AUTO mode
at the start of operation.
When the setting temperature was changed.
When the operation mode was changed to COOLING mode.
When the airflow mode was changed to AUTO mode.
AR*18LUAD
Operation mode Air flow mode Speed (rpm)
Hi 980
890
810
680
Me
Lo
Heating
S-Lo
Cooling
AR*24LUAN
Operation mode Air flow mode Speed (rpm)
Hi 1250
1150
1050
840
Me
Lo
Heating
S-Lo
Cooling
AR*30LUAN
Operation mode Air flow mode Speed (rpm)
Hi 1250
1150
1050
840
Me
Lo
Heating
S-Lo
Cooling
AR*36LUAN
Operation mode Air flow mode Speed (rpm)
Hi 1310
1240
1150
960
Me
Lo
Heating
S-Lo
Cooling
AR*45LUAN
Operation mode Air flow mode Speed (rpm)
Hi 1300
1130
950
Me
Lo
Heating
Cooling
AR*54LUAK
Operation mode Air flow mode Speed (rpm)
Hi 1300
1130
950
Me
Lo
Heating
Cooling
AR*45LUAK

Fujitsu AO 45LJBYL Series Specifications

General

Brand	Fujitsu
Model	AO 45LJBYL Series
Category	Air Conditioner
Language	English