Need help?Do you have a question about the Fujitsu AOU9RLS2H and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| COP | 3.61 |
| Noise Level (Indoor) | 26 dB |
| Dimensions (Indoor Unit) | 270 x 835 x 203 mm |
| Dimensions (Outdoor Unit) | 540 x 790 x 290 mm |
| Energy Efficiency Ratio (Cooling) | 3.5 |
| Energy Efficiency Ratio (Heating) | 3.8 |
| Indoor Unit Dimensions (H x W x D) | 270 x 835 x 203 mm |
| Outdoor Unit Dimensions (H x W x D) | 540 x 790 x 290 mm |
Details on energy efficiency, design, and low-temperature operation for extra cold climates.
Explains functions like timers, signal codes, and temperature unit settings.
Lists detailed technical specifications including capacity, power, dimensions, and operating ranges.
Provides detailed measurements and installation clearances for the indoor unit.
Illustrates the electrical connections and components within the indoor unit.
Presents cooling and heating capacity data across various indoor and outdoor temperatures.
Shows air velocity distribution and airflow rates for different fan speeds and modes.
Displays noise level curves for cooling and heating operations at different frequencies.
Outlines electrical specifications like voltage, frequency, and wiring requirements.
Details protection mechanisms like circuit, terminal, and fan motor protection.
Covers control input and output signals for remote operation and status monitoring.
Explains how to configure indoor unit functions using the remote controller.
Lists available optional controllers and kits for enhanced functionality.
Lists detailed technical specifications for the outdoor unit models.
Provides detailed measurements and installation requirements for the outdoor unit.
Illustrates the refrigerant flow and key components in the system.
Shows the electrical connections and components for the outdoor unit.
Provides correction factors for capacity based on pipe length and height difference.
Details how to calculate additional refrigerant charge based on pipe length.
Lists airflow rates for cooling and heating operations at different fan speeds.
Displays noise level curves for cooling and heating operations for outdoor units.
Outlines electrical specifications like voltage, frequency, and wiring for outdoor units.
Details safety features and protection mechanisms for the outdoor unit.
To Next Page
