7. MINIMUM HEAT OPERATION
MINIMUM HEAT operation functions by pressing MIN. HEAT button
on a wireless remote control.
This function prevents a room from overcooling. (When there is no one)
* Timer and MINIMUM HEAT (Wireless RC only) functions of a remote
control specified as the secondary cannot be used.
Operatioin mode Heating
Set temperature 50°F (10°C)
Fan mode Auto
Minimum heat operation
8. ECONOMY OPERATION
ECONOMY operation functions by pressing ECONOMY button on a remote control.
This function shifts target temperature like below.
Mode Cooling/ Dry Heating
Target temperature Set temperature + 2°F (1°C) Set temperature - 2°F (1°C)
04-22