Type
Duct
Inverter heat pump
Model name AMUG24LMAS AMUG30LMAS AMUG36LMAS AMUG48LMAS
Connection pipe
Size
Liquid
in (mm)
Ø 3/8 (Ø 9.52)
Gas Ø 5/8 (Ø 15.88)
Method Flare Flare Flare Flare
Drain port Size in (mm) Ø 3/4 (19) [O.D.] Ø 3/4 (19) [O.D.] Ø 3/4 (19) [O.D.] Ø 3/4 (19) [O.D.]
Operation range
Cooling
°F (°C) 64 to 90 (18 to 32)
%RH 80 or less 80 or less — —
Heating °F (°C) 60 to 86 (16 to 30)
NOTES:
• Specifications are based on the following conditions:
– Cooling: Indoor temperature of 80 °FDB/67 °FWB (26.67 °CDB/19.44 °CWB), and outdoor temperature of 95 °FDB/75 °FWB (35 °CDB/23.9 °CWB).
– Heating: Indoor temperature of 70 °FDB/59 °FWB (21.11 °CDB/15 °CWB), and outdoor temperature of 47 °FDB/43 °FWB (8.33 °CDB/6.11 °CWB).
– Pipe length: 24 ft 7 in (7.5 m), Height difference: 0 ft (0 m). (Between outdoor unit and indoor unit.)
– Standard static pressure: 0.18 in.WG (45 Pa): 24 model, 0.23 in.WG (58 Pa): 30, and 36 model, 0.28 in.WG (70 Pa): 48 model
• Protective function might work when using it outside the operation range.
• *1: Maximum current:
– The maximum value when operated within the operation range.
– The total current of indoor unit and outdoor unit.
• *2: Sound pressure level:
– Measured values in manufacturer’s anechoic chamber.
– Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
1-1. Indoor unit
- (01-2) - 1. Specifications
GENERAL
INFORMATION
GENERAL
INFORMATION
To Next Page
Loading...
Need help?
General
