Need help?Do you have a question about the Fujitsu AOYG07LEC and is the answer not in the manual?
General| Cooling Capacity | 2.0 kW |
|---|---|
| Heating Capacity | 2.5 kW |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Weight (Indoor Unit) | 8.5 kg |
| Indoor Unit Noise Level (Low) | 21 dB(A) |
| Outdoor Unit Noise Level | 47 dB(A) |
| Air Flow (Indoor, High) | 540 m³/h |
Describes how the sensor perceives temperature and controls compressor frequency for cooling.
Describes how the sensor perceives temperature and controls compressor frequency for heating.
Explains compressor frequency control based on temperature and set temperature in Dry mode.
Details how the system automatically switches between modes based on temperature changes.
Covers fan speed settings and airflow control during different operation modes.
Details the types of outdoor fan motors and their speed control methods.
Covers compressor frequency range, start-up control, and limitations based on outdoor temperature.
Details various timer settings available via the wireless remote controller.
Explains the conditions for starting and completing defrost operation.
Details protections like discharge gas temperature over-rise and current release control.
Explains the error codes displayed on indoor unit and remote controller indicators.
Provides troubleshooting steps for issues indicated by error codes, starting with serial communication errors.
Provides troubleshooting steps for issues without specific error codes, starting with no power.
Guides diagnosis for abnormal noises and water leaking issues from the unit.
Details diagnostic methods for the compressor and related service parts.
Details checks for indoor and outdoor unit fan motor rotation and resistance.
Explains how to configure various settings like filter signs, temperature corrections, and auto restart.
Provides resistance and voltage values for indoor and outdoor unit thermistors at different temperatures.
To Next Page
