To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu AOYG09KMTA and is the answer not in the manual?
General| Type | Air conditioner outdoor unit |
|---|---|
| Ionizer | - |
| Multi-split | No |
| Product color | White |
| Compressor type | Rotary |
| Gas hose diameter | 9.5 mm |
| Hose length (max) | 15 m |
| Inverter technology | Yes |
| Liquid hose diameter | 6.35 mm |
| Refrigerating medium | R32 |
| Air conditioner functions | Cooling, Heating |
| Refrigerating medium weight | 600 g |
| Cooling capacity in watts (nominal) | - W |
| Operating temperature (cooling) (T-T) | -10 - 46 °C |
| Operating temperature (heating) (T-T) | -15 - 24 °C |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Design load (cooling) | - kW |
| Hourly energy consumption (cooling) | - kWh |
| Indoor unit noise level (high speed) | - dB |
| Outdoor unit depth | 290 mm |
| Outdoor unit width | 663 mm |
| Outdoor unit height | 541 mm |
| Outdoor unit weight | 23000 g |
| Outdoor units quantity | 1 |
| Outdoor unit noise level | 61 dB |
| Cooling airflow (outdoor unit) | 750 m³/h |
| Outdoor unit sound power level | 46 dB |
Details specifications for power supply, current, power consumption, EER, and COP for indoor and outdoor units.
Lists and illustrates replaceable parts for the indoor unit, including assemblies and individual components.
Lists and illustrates replaceable parts for the outdoor unit, including assemblies and individual components.
Explains compressor frequency range, start-up control, and limitations based on outdoor temperature.
Describes timer settings for wireless and wired remote controllers, including ON/OFF, Program, and Sleep timers.
Specifies the conditions related to outdoor heat exchanger temperature for initiating defrost operation.
Defines the conditions under which defrost operation is released, based on temperature or time.
Describes automatic defrosting in heating mode when frost adheres to the outdoor heat exchanger.
Details protection against high discharge gas temperature by reducing compressor frequency or stopping it.
Details error codes and corresponding indicator lamp patterns for indoor units and wired remote controllers.
Provides diagnostic steps for specific error codes related to communication, sensors, and PCB failures.
Guides for diagnosing issues like no power, no cooling/heating, or abnormal noise without specific error codes.
Provides troubleshooting steps and checks for compressor issues like failure to start or abnormal noise.
