EasyManua.ls Logo

Fujitsu ARXC90GBTH User Manual

Fujitsu ARXC90GBTH
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ARXC90GBTH and is the answer not in the manual?

Fujitsu ARXC90GBTH Specifications

General IconGeneral
BrandFujitsu
ModelARXC90GBTH
CategoryAir Conditioner
LanguageEnglish

Summary

1. TEST RUN

1-1 EXECUTION PROCEDURE AND EXECUTION PRECAUTIONS

Details procedures and precautions for test run execution, covering installation and preparation steps.

1-2 TEST RUN METHOD

Outlines methods for conducting test runs, including additional refrigerant charging and initial setup.

1-2-1 Check Items Before Power ON

Lists essential checks for outdoor and indoor units before powering on the system.

1-2-2 Check Items After Power ON

Details checks to perform after powering on the system, including operation voltage and sound checks.

1-2-5 Indoor unit connection check

Describes the process to check the indoor unit connection, verifying unit count and volume ratio.

2. OUTDOOR UNIT OPERATION CONTROL

2-2 COMPRESSOR OPERATION

Explains compressor operation and stop conditions, and how capacity control is managed.

2-6 PROTECTIVE FUNCTION

Lists various protective functions, their detect parts, operating conditions, and operations for system safety.

4. TROUBLE SHOOTING

4-2 ABNORMAL OPERATION

Covers abnormal operation scenarios, including indoor and outdoor unit displays and error indications.

4-2-3 Error Code List for Outdoor Unit

Provides a comprehensive list of error codes for the outdoor unit, their contents, and corresponding troubleshooting steps.

4-2-5 Error Code List for Simple and Wired Remote Controller

Lists error codes for simple and wired remote controllers, including contents and troubleshooting references.

4-4 SERVICE PARTS INFORMATION

Compressor

Provides diagnosis methods for compressor issues like no start, stopping after start, or abnormal noise.

6. DISASSEMBLY PROCESS

15. COMPRESSOR removal

Provides precautions and procedures for compressor removal, including power off, panel removal, valve operation, and refrigerant collection.

Related product manuals