Exterior Part name Model name Summary
Drain pump unit UTZ-PX1NBA
Optional drain lift up mechanism
allows more flexible installation.
External
connect kit
UTY-XWZXZG
Use to connect with various peripheral
devices and air conditioner PCB.
For control output port.
Air outlet shutter
plate
UTR-YDZC
Installed at the air outlet when 3-
directions mode is performed.
Wide panel UTG-AKXA-W
Hides the gap between the ceiling hole
and the cassette grille.
Panel spacer UTG-BGYA-W
If there is not enough height in the
ceiling space, by inserting this spacer
between the cassette grille and the
ceiling surface, the height of the unit
body goes into the ceiling space
become 50-mm lower.
Fresh-air intake
kit
UTZ-VXAA
By attaching Fresh-air intake kit to the
indoor unit, it can be taken in fresh air
of up to 10% of “high” air volume of
the indoor unit.
Insulation for
high humidity
UTZ-KXGA
Install when the under-roof condition is
expected to be the humidity of over
80% and the temperature of over
30 °C.
Wireless LAN
adapter
UTY-TFSXZ1
Remotely manage an air conditioning
system using mobile devices such as
smartphones and tablets.
For connection indoor unit with UART
interface.
Modbus
converter
UTY-VMSX
For connection between indoor unit
with UART interface and a Modbus
open network.
KNX converter UTY-VKSX
For connection between indoor unit
with UART interface and a KNX open
network.
6-4. Others
- (02-34) - 6. Optional parts
TECHNICAL DATA
AND PARTS LIST
TECHNICAL DATA
AND PARTS LIST
To Next Page
Loading...
Need help?
General
