Fujitsu ASTG18KMTC Service Instruction

03-01
3-1. FUNCTION SETTING
Follow the instructions in the Local Setup Procedure, which is supplied with the remote control,
in accordance with the installed condition.
After the power is turned on, perform the Function Setting on the remote control.
The settings may be selected between the following two: Function Number or Setting Value.
Settings will not be changed if invalid numbers or setting values are selected.
Depending on the installed environment, correction the room temperature sensor may be required.
Select the appropriate control setting according to the installed environment.
The temperature correction values show the difference from the Standard setting “00”
(manufacturer’s recommended value).
3-1-1 INDOOR UNIT
( Factory setting)
Setting Description Function Number Setting Value
Standard (400 hours)
Long interval (1000 hours)
Short interval ( 200 hours)
No indication
11
00
01
02
03
1-1. Filter Sign
Select appropriate intervals for displaying the fi lter sign on the indoor unit according to the
estimated amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
1-2.
Room temperature control for indoor unit sensor
Setting Description Function Number Setting Value
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
( Factory setting)
Standard setting
-0.5°C
-1.0°C
-2.0°C
-1.5°C
-2.5°C
-3.0°C
-3.5°C
-4.0°C
+0.5°C
+1.0°C
+1.5°C
+2.0°C
+2.5°C
+3.0°C
+3.5°C
+4.0°C
No correcion 00°C
30
(For
cooling)
31
(For
heating)
More
Cooling
Less
Heating
Less
Cooling
More
Heating

Fujitsu ASTG18KMTC Specifications

General

Brand	Fujitsu
Model	ASTG18KMTC
Category	Air Conditioner
Language	English