REPLACEMENT PARTS
03-39
PROCESS
MODEL : AOU36RML
USED
PARTS
INVERTER BOX A
MAIN PCB
Fig.1
Hook
SCREW, TAPPING
Temporarily fix!
Through this hole.
W12 YELLOW,W13 BLUE
(MAIN PCB)
WIRE WITH TERMINAL
Fig.8
Fig.9-11
Fig.7
Don't forget to take a cushion(D101).
Don't bend foot (D101).
INVERTER BOX A
MAIN PCB
SCREW,TAPPING
Assemble PCB ASSY.
MAIN PCB
REGULATIONS
Certainly set PWB ASSY under the 3 hooks of INVERTER BOX A.
Before it is temporary fix of PWB ASSY, As shown in the Fig.3-6, pull out the wires of PWB ASSY.
After it is temporary fix of PWB ASSY, As shown in the Fig.7-11, pull out the wires of PWB ASSY.
Don't forget to take a cushion D101 (DIODE BRIDGE).
Don't bend foot D101 (DIODE BRIDGE).
1
3
3
2
1
2
To Next Page
Loading...
